Uninterruptible power supplies (UPS) are used in organizations where prolonged power outages are not tolerated. If critical power is interrupted, the UPS system performs a backup and continues to operate until power is restored. However, it is not uncommon for a power supply to be interrupted for an extended period of time, and in this case, the UPS battery is often discharged. In such cases, a standby generator and fuel reserves are needed to maintain power; a standby generator alone is not sufficient, as it will not automatically start if not combined with the UPS. There are many types of backup generators and UPSs, so choosing one is very important.
UPS and generators must be properly coordinated. If not, they can cause each other problems. The most common problems are related to the generator’s frequency range being too wide for the UPS or the generator’s rate of rising is too high for the UPS to follow safely. This problem can be solved by installing electronic controllers in the standby generators, which control their power by limiting their frequency. Another problem is that the UPS interferes with the generator’s power control because the generator often has a rectifier load control circuit that provides a power grid.
The backup generator must not only be coordinated with the UPS but also properly sized for the load that the UPS can handle. The generator must be capable of handling all the tasks of the UPS as well as the additional loads. For example, there is no point in running all the computer systems in a building if the air conditioning is not operating at an optimal temperature.
Physical and environmental factors must also be considered when planning the installation of generators. Once the permitting process is complete, a suitable location for the generator must be determined. In many cases, generators are installed outdoors in weatherproof enclosures. This allows air to circulate around the generator and cool it while it is operating. The last thing an organization wants is for a backup generator to overheat and fail. In addition to cooling considerations, the generator should not be installed in close proximity to other utilities, such as the water supply, which could cause disruptions. This is important to avoid risks such as oil leaks or contamination of the water supply.
A backup generator to support the UPS system is important for most businesses and is a good way to keep the business running even without electricity. A generator as a backup source for the UPS system is the best way to keep the business running, as a situation where the business cannot run indefinitely is not desirable. Here are some of the key factors that can help you get the most out of your equipment
Sara has completed her education in marketing and started her career as a digital marketer. She is a content writer by profession. And she would love to add multiple things to her knowledge that she can add to her writing style. She writes about the best APC Smart-UPS.